+1 440 666 6786 +1 404 537 2266
Build my system
AMI
- Number of Mass Flow Controllers
- Seal Material
- TCD Filament Material
- Sulfur/Acid Resistant
- TCD and Valve Materials2
- Additional Detectors3
- Special Features
- Advanced Features
- Operating voltage (110 or 220 VAC)
1 Premium seals include Kalrez, PEEK, other Fluorocarbons
2 Special materials may be requested for the TCD, Valco valves. Not all material are available.
3 Multiple options are possible. Separate with a comma.
2 Special materials may be requested for the TCD, Valco valves. Not all material are available.
3 Multiple options are possible. Separate with a comma.
microBenchCAT
- Number of Gases
- Number of Liquids
- Pressure/Temp
- Reactor OD
- Reactor Material
- Gas/Liquid Separator
- GC Sampling Line
1 Must use Quartz reactor
2 Requires Stainless Steel or Incoloy HT 800 reactor
3 Must use Incoloy 800 HT reactor
2 Requires Stainless Steel or Incoloy HT 800 reactor
3 Must use Incoloy 800 HT reactor
BenchCAT
- Overall System Specifications
-
Temperature:
-
Pressure:
-
- Gas Feeds
-
Flow Range (Sccm) Typical Flow (Sccm)1 Gas Type Gas 1 Gas 2 Gas 3 Gas 4 Gas 5 Gas 6 Gas 6 -
Automated positive shut off valves required after each gas flow controller
-
- Liquid Feeds
-
Feed tank:Volume Liters
-
Tank / feed line heatingTemp C
-
Blanketing with inert gas
-
Flow Range (mL/min) Typical Flow (mL/min) Liquid to be Used Liquid 1 Liquid 2 -
Pump Preference2:Liquid 1:Liquid 2:
-
- Reactor Module
-
Reactor Type:Desired Flow Path:VolumeOther h
-
Gas Preheater:
-
Liquid Vaporizer:
-
Maximum Catalyst Volume:mL
-
Typical catalyst volume:mL
-
Number of Furnace Zones:
-
Bed Temperature Readings:
-
- Pressure Control
-
Pressure Reading:Pressure GaugeComputer display
-
- Product Handling
-
Liquid condenserCooling mediumTemp C
-
Heat tracing downstream of reactor:Specify the sections to be heated and up to what temperatureC
-
Gas Liquid Separator:
-
- Analysis and Material Balance
- Streams to Be Analyzed
-
Feed:
-
Product:
- Method of Analysis
-
Product:
-
Instrument preference, please specify:
-
Mass Balance Components:
- Optional Safety Features
-
Inert flush on power loss or shut down
-
Space Available (L x W x H)LWH
-
Describe any special size constraints or consideration
-
- Desired Delivery Date
-
-
Preferred Vendors for Major Components
-
Nature of RequestDays
-
Date planned for order placement
-
Please list any other special features, which are required
-
Other issues to be addressed:
-
1 This information is required for sizing the mass flow controllers. Please note that mass flow controllers will typically only deliver accurately in the 5 - 95% range of the full scale and that their reproducibility and accuracy is limited to 1% of full scale.
2 Syringe pumps can precisely deliver very low flows over a wide range with high accuracy, but are significantly more expensive than piston pumps.
System Summary:
Submit
